- (989) 317-8033
- 801 Industrial Dr, Mt Pleasant, MI 48858
- Mon - Fri: 8:00 AM - 5:00 PM
OTM-20PM
The OTM-20PM uses the same innovative technology as the 2000PM but in a smaller package. This machine is designed to run at a maximum of 75 parts per minute in pistol and 60 parts per minute in small rifle.
General Machine Specifications:
- OTM-160B NGF With Quick Change System.
- Magnetic Door interlocks for operator safety.
- Complete Guarding with 1/4″ polycarbonate windows.
- Stationary powder hopper for easy refill during operation.
- 5″ color touch screen.
- Physical Touch Buttons for easy operator interfacing.
- Optional Over all length check features.
- Optional Powder check features.
- 110V Power Requirement.
- 100 PSI Air Requirement.
- Mechanical indexer with sensors and alignment pin for true position repeatability.
- Foot Print: 48″ x 36″
- Weight 950 LBS
OTM-20PM Series Compatible Calibers
Pistols
- 380 ACP
- 9MM
- 9MM Makarov
- 357 Sig
- 38 Special
- 357 Mag
- 40 S&W
- 10MM
- 45 ACP
- 44 Mag
- 44 Special
Rifle
- 223/5.56
- 300 AAC
- 7.62 x 39
- 308 Win/7.62×51
- 6.5 Creedmoor
- 260 Rem
- 450 Bushmaster
- Call if you don’t see what you are looking for.
Pistols
- 10MM
- 45 ACP
- 44 Mag
- 44 Special
Rifle
- 308 Win/7.62×51
- 6.5 Creedmoor
- 260 Rem
- 30-06 Springfield
- 300 Win
- 338 Lapua
- 450 Bushmaster
- Call if you don’t see what you are looking for.
Previous
Next
OTM-2000PM
The OTM-2000PM is a revolutionary change in the industry, delivering everything you need when it comes to daily operation, set up and ease of use. Cases are held down from above using a spring loaded cam to ensure a more accurate primer insertion. The OTM-2000PM comes standard with an OTM-240A feed system.
OTM feeders have been proven in the industry to be safe, reliable and effective at keeping production rates up. The feeder is controlled on the main PLC and has low bowl indicators which let the operator know when the feeder needs to be filled.
The OTM-2000PM Series was built for continuous production along with numerous safety, checks and measure systems to ensure production of the highest quality products in the least amount of time.
OTM-2000PM Series Compatible Calibers
Pistols
- 380 ACP
- 9MM
- 9MM Makarov
- 357 Sig
- 38 Special
- 357 Mag
- 40 S&W
- 10MM
- 45 ACP
- 44 Mag
- 44 Special
Rifle
- 223/5.56
- 300 AAC
- 7.62 x 39
- 308 Win/7.62×51
- 6.5 Creedmoor
- 260 Rem
- 450 Bushmaster
- Call if you don’t see what you are looking for.
OTM-2150PM
The OTM-2150PM uses the same innovative technology as the 2000PM but with the added capability of crimping or staking the primer for military spec applications.
This machine is OTM’s most heavy duty priming machine to date. Everything about this machine is designed for long running military contracts. From hardened components to oversized and upgraded feed systems that are conveyor ready.
OTM-2150PM Series Compatible Calibers
Pistols
- 9mm
- 45 ACP
Rifle
- 223/5.56 x 45
- 5.45 x 39
- 7.62 x 39
- 308 Win/7.62×51
Previous
Next
OTM-2000PM Continued
- Continuous motion primer insertion machine.
- Sound enclosure.
- OTM-240A feed system.
- Visual primer inspection, checks for upside down, missing primers.
- Quick change tooling.
- CAM cartridge insert that is set from the factory as a 1 to 1 ratio.
- Stack light indicators to let the operator know machine status.
- 7″ touch screen PLC/HMI for machine controls.
- E-stop and other safety features.
- 3/8 polycarbonite windows for operator safety.
- Door Safety sensors that automatically shut down machine if opened.
- All parts machined from billed aluminums, steels and stainless.
- All fasteners are stainless steel to prevent corrosion issues.
- All parts that can be will be coated with a Salt Bath
- Nitriding for corrosion prevention and extended machine wear.
- Solid steel frame.
- Smooth surfaces for easy clean up and maintenance.
- Set up, install and training on site.
- Product manual (digital and hard copy) that will include recommended ware parts, and daily maintenance.
- 200 PPM run rate. (most calibers with single primer bowl)
- Power requirements 480/220V.
Safe, Reliable, and Effective
The OTM -2000PM comes standard with an OTM-240A feed system. The 24” feeder is equipped with primer presents check camera to assure only empty primer pockets are fed.
OTM feeders have been proven in the industry to be safe, reliable, and effective at keeping production rates up. Feeder is controlled on the main PLC and has low bowl indicators which let the operator know when the feeder needs to be filled.
Quality Checks
The OTM-2000PM come standard with a post prime inspection. This means we can ensure that nearly 100% of your parts that go into your finished bins are properly primed quality cases. With cloud connectivity these ethernet base cameras can be connected to your network to allow you to download and inspect the images.
Images of bad parts can be tagged for inspection at later times. Parts are inspected prior to the priming operation, cases are stacked in a vertical line and presented to the camera in a way that allows for quality images at high speeds.
Ease of Access
OTM -2000PM has 24 stations that can be removed in seconds. On other machines if damage occurs to a station, replacing the tooling can result in hours of down time trying to fix issues.
With the modular approach of the OTM design, changing a station is as simple as turning a thumb screw and pulling straight up. This allows tooling failure problems to be fixed in minutes not hours.
4 Easy Steps to Changing Calibers
Most caliber change overs can be completed in under 1 hour.
Primer Feed
Accuracy & Repeatability
The OTM -2000PM comes standard with an OTM-6PF which is a 6 inch primer bowl that is CNC milled for accuracy and repeatability. Unlike other vibe bowls that are welded and all different from each other we strive to provide the same parts everytime.
Whether it is 2 months or 5 years after purchase you will always get the same consistian replacement parts. The OTM-6PF sits on a 5 way adjustable base that contains the swappable primer slide for easy setup and change over.
Each machine comes with a standard variable speed controller that allows you to be able to dial in the primer feed rate to your desired rate.
Ease of Control
Our proprietary OTM control is standard across all our machines. The software features many useful tools including lot point control, this allows users the ability to make the machine stop after desired set points.
Only good parts passed by the camera are counted to the lot. Other things include active part per minute; this can be exported to use as a metric to view your machines efficiency rating. Camera controls, bowl and hopper controls, active alarms, and much more.
